Resin luminous characters of edge using high-temperature aging fast resin, resin luminous characters of edge longitudinal strength, transverse soft, making resin luminous characters, light box save time, save work, fundamentally solves the traditional production technology need cutting, welding, painting and other complex process, greatly improving the work efficiency. To introduce the following by the total force has about resin luminous word side of the production process, specific as follows.
Resin luminous characters of edge production process:
Making resin luminous word length of the side bar, waxing polishing compound good edge, ingredients, casting, cutting, is used in the surrounding edge.
1. Soft rope according to the available font roughly estimate, and according to the length of the template you determine the length of each side bar, had better be in 1 m to 2 mi long.
2. Wax must be 2 times, and carefully polished, respectively is a rectangle, can surrounding edge material is glass, wood, etc with double-sided adhesive good side and a low, avoid the resin flow out.
3. Calculate according to the number of edge to make the resin resin dosage, press 1 stick of 1 m article 5 cm wide and the dosage of 200 g - 220 - g is calculated. Do not recommend too thick or too thin, his master. Add pigment (suggest fabrics make word set together, at this time) to ensure consistent color, when add curing agent stirring, plus promoter, respectively.
4. Suggest surface points pouring one (1/3), the surrounding edge of edge with resin luminous word can be a one-off, wants even slower when pour monet, allow it to flow naturally.
5. Promote dose to control the gelation time by adjusting in 30 to 50 minutes, 1 to 2 hours after cutting, after use the blade row, tore, suggest that at this time every smooth face with duct tape pasted, so as to avoid rupture and getting dirty, you consider yourself.
