LED advertising word stainless steel edge method steps:
1, LED outdoor signage production needs tools: 30W or 40W soldering iron, solder, drill, glue gun, screwdriver, etc
2, LED outdoor signage production need other materials: molding paint tin, wire, LED signage special power supply (DC5V).
3, drilling: the outsourcing of the forming iron sheet word fixed to the appropriate, with electric drill drilling (9mm), spacing according to the height of outdoor brand installation and production cost, generally LED center spacing: 10-30mm, smaller spacing, higher brightness, higher cost.
4. Plug in the lights: clean up the drilled holes and put the lights one by one.
5, connection: the United States Cube logo company has been made and connected to the waterproof LED lamp string, each string has reserved the end of the wire, the general red received the positive pole of the power supply, the black end of the wire is received to the negative pole of the LED special power supply, the power supply is best placed in the waterproof power supply box.
6, test aging: after all the LED connected, check the treatment of not bright, and then carry out aging test for 48 hours.
7, transport to the site, scaffold site installation.
